Home / Blog / Melted Vinyl Siding from Window Reflections, and How Film Can Help
Window film
Melted Vinyl Siding from Window Reflections, and How Film Can Help
If you've got a wavy, warped patch in your vinyl siding, a nearby window may be the cause. Here's why it happens and how exterior window film can help stop it.
By Evan Maiden3 min read
Melted siding is a big problem we help homeowners solve, and most people have no idea what's causing it. You walk around the side of the house and find a patch of vinyl siding that's wavy, buckled, or caved in. Nothing hit it. Nothing touched it. It just looks like it got cooked.
It probably did. We're EM Window Tinting, and we help homeowners across Northern Ohio deal with melted vinyl siding by putting the right window film on the glass that's causing it.
Why windows melt siding
A lot of newer windows are energy efficient, often called low-E windows. They're built to reflect heat. That's great for the inside of the house. The trouble is where that reflected sunlight goes.
Depending on the angle of the sun and the shape of the glass, a window can bounce a concentrated beam of sunlight onto a nearby wall. Some double-pane windows also flex a little with temperature and air pressure, and that slight curve can focus the light even more, kind of like a magnifying glass.
Vinyl siding doesn't handle that kind of heat well. Over time, that hot spot can warp, ripple, or melt it.
What the damage looks like
Melted vinyl siding usually shows up as:
A wavy or rippled section that wasn't there before
Siding that looks sunken, stretched, or bubbled
Damage in an odd shape or a strip, not along a seam
It's not always your own windows doing it. Sometimes it's a neighbor's window across the way, and sometimes your windows are hitting their house. It can also show up on a deck, a fence, a grill, or a car parked in the wrong spot.
The film fix: exterior window film
Replacing the siding alone doesn't solve anything. If the window is still reflecting that beam, the new siding is going to warp again.
The fix is to change how the window reflects. We install an exterior window film on the outside of the glass that's causing the problem. It cuts down the reflection that's hitting the siding, so the hot spot goes away. Done right, it's hard to notice from the street and the window still does its job.
This is one of the jobs where we really want to see the house first. We'll look at:
Where the damage is and how big it is
Which window or windows line up with it
What time of day the sun hits that glass
Whether the window belongs to you or a neighbor
Then we'll walk you through the film options and tell you honestly whether film is a good fix for your situation.
Why this shows up a lot around here
Vinyl siding is everywhere in Northern Ohio, and a lot of homes have had window upgrades over the years. Put houses close together, add energy-efficient glass and some afternoon sun, and you've got the perfect setup for melted siding. It's a newer problem a lot of homeowners have never heard of until it happens to them.
What a visit looks like
It's simple. You call us, and we handle the rest, from picking the right film to the install and cleanup.
Usually not. The reflection happens on the outside of the glass, so the fix needs to be on the outside too.
Will this repair the siding that already melted?
No. Film stops the cause. The damaged siding still needs to be replaced, but now it won't warp again.
Is it always the neighbor's windows?
Not always. It can be your own windows bouncing light onto another part of your house, like an L-shaped wall or a garage.
Does every low-E window cause this?
No. It takes the right mix of glass, angle, sun, and distance. That's why we like to look at it in person.
How do I get a quote?
We come out in person for a consultation so we can check your glass and see exactly what you're working with. From there, we'll give you a quote for your windows.